TP Series CNC Turning and Polishing Composite Machine Tool
TP Series CNC Turning and Polishing Composite Machine Tool

Ethiopia TP Series CNC Turning and Polishing Composite Machine Tool

The TP series CNC turning and polishing composite machine tool is a series of CNC turning and polishing composite machine tools developed by Jingjia Equipment based on customer needs, specifically designed for the precise and efficient processing of large heavy shaft parts.

Category:

EthiopiaProducts

Phone:400-888-8888

Inquire

Product Description

　　 ● Bed Body

　　Integral three-guideway box structure, cast iron HT300 with added alloy elements, one-time molding casting, subjected to secondary aging treatment; guideway width 1170mm, guideway surface is medium-frequency quenched and precisely ground by imported guideway grinding machine.

　　 ● Machine Tool Spindle

　　Selected with precision heavy-duty bearings, the main motor directly drives the spindle rotation through a belt, running smoothly, stepless speed regulation over the entire speed range, capable of constant linear speed cutting.

　　 ● Saddle and Feed System

　　X and Z axis transmission uses high-precision ball screws with preload and pretension, both ends equipped with special angular contact ball bearings for ball screws, feed motor directly connected to the ball screw to ensure motion and positioning accuracy. X and Z axis guideways are medium-frequency quenched with hardness reaching HRC52-58, precision ground, motion surfaces covered with imported wear-resistant material TURCITE-B, full forced lubrication to ensure the best combination of feed accuracy and rigidity.

　　 ● Tool Post

　　According to processing requirements, can be equipped with vertical four-station tool post, horizontal eight-station tool post, or horizontal twelve-station tool post: vertical four-station tool post has good rigidity, no lifting required, quick and convenient tool change, high indexing accuracy. Horizontal eight and twelve-station tool posts hold more tools, meeting complex part processing needs, with internal cooling spray, which helps improve workpiece surface quality and prevent coolant splashing.

　　 ● Hydraulic Rotary Tailstock

　　High rotary accuracy, heavy load capacity; tailstock sleeve controlled by system for extension and retraction, tailstock body movement driven by saddle through pin shaft, easy operation, fast speed, high efficiency; tailstock can be hydraulically floated for easy manual pushing, convenient operation; sleeve is quenched, chrome plated and precision ground, sturdy structure, capable of heavy cutting.

　　 ● Hydraulic Center Rest

　　Can be configured with hydraulic self-centering center rest with different clamping ranges according to workpiece processing requirements. Program controlled automatic open and close, convenient for loading and unloading workpieces. Repeat centering accuracy 0.005-0.015mm.

　　 ● Product Features: High Precision, High Rigidity, High Efficiency

　　Spindle Radial Runout 5 μm

　　Bed Guideway Width 1170mm

　　Maximum Load 8000kg

　　Processing Efficiency Improvement Rate >100%

 

Machine Specifications

 

Item

TP50 □

TP63 □

Processing Capacity

Bed Swing Diameter

500mm

630mm

 

Saddle Swing Diameter

500mm

630mm

 

Center Distance

3000mm □, 5000mm □, 6000mm

 

Load Capacity

8000kg

Spindle Box

Spindle Nose End

A₂-15

Spindle Bore Diameter

140mm

Spindle Speed

1-500rpm

Spindle Speed Variation

Stepless Speed Regulation

Chuck

Chuck Type

Standard: Three-jaw chuck Optional: Four-jaw single-action chuck, hydraulic chuck

Chuck Diameter

φ500mm □, φ630mm □

Saddle

X Axis Travel

420mm

Z Axis Travel

3600mm, 5600mm, 6600mm

Servo Motor

X1: 4KW (5.4HP) X2: 4KW (5.4HP) Z: 7KW (9.4HP)

Rapid Feed

X1: 6m/min X2: 6m/min Z: 6m/min

Cutting Feed

X/Z: 0.001-500mm

Turret

Turret Manufacturer

Standard: Vertical 4-station Optional: Horizontal 8-station □, Horizontal 12-station

Dust Removal

Dust Removal Cabinet

Power 1.5KW (2HP); Fan Flow 265m³/h; Fan Vacuum 235mbar

Hydraulic Rotary Tailstock

Sleeve Diameter

φ200mm

Sleeve Stroke

250mm

Sleeve Taper

MT NO.6

Chip Conveyor, Water Tank

Water Tank

Standard

Rear Chip Removal

Optional: With port, Without port

Front Chip Removal

Optional: With port, Without port

Motor

Continuous Stop

AC 30KW(40HP)

30-minute freeze

AC 37KW(50HP)

Hydraulic pump

2.2KW(3HP)

Cooling water pump

0.55KW(0.75HP)

Bed

Bed width

1170mm

Control

Controller

Optional: SIEMENS 828D□, FANUC Oi-TF □, GSK system 988TD□

Bed weight

 

3m:15T; 5m:18T; 6m:19T;

 

previous page:

EthiopiaTE Series CNC Lathe

EthiopiaTEBV Series Butterfly Valve Grinding and Composite Processing CNC Machine

: next page