Roller The bracket is used for machining long shaft parts An important component required for machining, it is Optional component for TE series CNC lathes. Roller The bracket roller uses large-diameter rolling bearings inside, matched externally with high-strength wear-resistant rollers. Each roller is manually adjusted individually. The sliding shaft adopts a square slide block structure with high strength, effectively ensuring precision and extending service life. 。
Load bearing 5000 kg
Support diameter range: Φ600-1000mm
Machine specifications
| Machine specifications |
| Item/Type |
TE125 □ |
TE140 □ |
TE160 □ |
| Machining capacity |
Bed swing diameter |
1270mm |
1420mm |
1620mm |
| Saddle swing diameter |
830mm |
1000mm |
1200mm |
| Distance between centers at top |
3000mm □ , 5000mm □ , 6000mm □ , 8000mm □ |
| Load bearing |
10000Kg |
| Spindle box |
Spindle nose end |
A2-15 |
| Spindle bore diameter |
155mm |
| Spindle speed |
1-500 rpm |
| Spindle speed change |
4 gears |
| Chuck |
Chuck type |
Standard: four-jaw single action Optional: three-jaw chuck □, hydraulic chuck □ |
| Chuck diameter |
φ800mm □, φ1000mm □, φ1200mm □ |
| Saddle |
X-axis travel |
900mm |
| Z-axis travel |
3300mm, 5300mm, 6300mm, 8300mm |
| Servo motor |
X: 4KW (5.4HP) Z: 7KW (9.4HP) |
| Rapid feed |
X: 6m/min Z: 6m/min |
| Cutting feed |
X/Z: 0.001-500mm |
| Turret |
Turret manufacturer |
Standard: vertical 4-station □ Optional: horizontal 8-station □, horizontal 12-station □ |
| Boring tool holder |
Boring tool holder |
Optional: (boring bar φ100) □ |
| Hydraulic rotary tailstock |
Sleeve diameter |
φ200mm |
| Sleeve travel |
250mm |
| Sleeve taper |
MT NO. 6 |
| Chip conveyor |
Rear chip removal |
Optional: Yes □, No □ |
| Front chip removal |
Optional: Yes □, No □ |
| Grating scale |
Manufacturer |
Optional: Yes □, No □ |
| Motor |
Continuous rating |
AC 30KW (40HP) |
| 30-minute rating |
AC 37KW (50HP) |
| Hydraulic pump |
2.3KW (3HP) |
| Cooling water pump |
0.56KW (0.75HP) |
| Bed |
Bed width |
850mm |
| Control |
Controller |
Optional: SIEMENS 828D □, FANUC 0i-TF □, GSK system 988TD □ |
