TE Series CNC Lathe
Adopting internationally advanced design concepts, the casting is made of high-standard wear-resistant cast iron and undergoes secondary aging treatment. The guide rail surface is precision ground by an imported guide rail grinding machine after medium-frequency quenching. The gear system is optimized with profile modification for four-speed stepless variable speed constant linear cutting, resulting in good machining accuracy, high rigidity, and strong vibration resistance.
Classification:
Key words:
TE Series CNC Lathe
Product Description
● Bed
Integral box structure, cast iron HT300 with added alloy elements, one-time molding casting, subjected to secondary aging treatment; guideway width 850mm, guideway surface is medium-frequency quenched and precisely ground by imported guideway grinding machine.
● Machine Tool Spindle
Supported by precision heavy-duty bearings in a three-point support, gears are high-frequency quenched and precisely ground, running smoothly with noise below industry standards. Equipped with an external oil cooler, automatic forced circulation lubrication, the transmission system operates flexibly and effectively controls temperature to ensure spindle accuracy stability.
● Saddle and Feed System
X and Z axis transmission uses high-precision ball screws with preload and pretension, both ends equipped with special angular contact ball bearings for ball screws, feed motor directly connected to the screw to ensure motion and positioning accuracy. X and Z axis guideways are medium-frequency quenched with hardness reaching HRC52-58, precision ground, motion surfaces coated with imported wear-resistant material TURCITE-B, full forced lubrication to ensure the best combination of feed accuracy and rigidity.
● Tool Post
According to processing requirements, can be equipped with vertical four-station tool post, horizontal eight-station tool post, horizontal twelve-station tool post: vertical four-station tool post has good rigidity, no lifting required, fast and convenient tool change, high indexing accuracy. Horizontal eight and twelve-station tool posts hold more tools, meeting complex part processing needs, with internal cooling spray, which helps improve workpiece surface quality and prevent coolant splashing.
● Hydraulic Rotary Tailstock
High rotary accuracy, heavy load capacity; tailstock sleeve controlled by system for extension and retraction, tailstock body movement driven by saddle through pin shaft, easy operation, fast speed, high efficiency; tailstock can be hydraulically floated for easy manual pushing, convenient operation; sleeve is quenched, chrome plated and precisely ground, sturdy structure, capable of heavy cutting.
● Steady Rest and Follower Rest
Important auxiliary devices for machining long shaft parts, rollers use large diameter rolling bearings internally, matched with high-strength wear-resistant rollers externally, each roller manually adjusted individually, sliding shaft uses square slide block structure with high strength, effectively ensuring accuracy and extending service life; steady rest clamping diameter 100-600mm, follower rest maximum diameter 1200mm, covering main machining range of the machine tool.
● Product Features: High Precision, High Rigidity
Spindle Radial Runout 5 μm
Spindle Rated Output Torque 18726 Nm
Bed Guideway Width 850 mm
Maximum Load 10000 kg
Machine Specifications
|
Item |
TE125 |
TE140 |
TE160 |
|
|
Processing Capacity |
Bed Swing Diameter |
1270mm |
1420mm |
1620mm |
|
Saddle Swing Diameter |
850mm |
1000m |
1200m |
|
|
Center Distance |
3000mm□, 5000mm□, 6000mm□, 8000mm□ |
|||
|
Load Capacity |
10000kg |
|||
|
Spindle Box |
Spindle Nose |
A₂-15 |
||
|
Spindle Bore Diameter |
50mm |
|||
|
Spindle Speed |
1-500rpm |
|||
|
Spindle Speed Change |
4 Gears |
|||
|
Chuck |
Chuck Type |
Standard: Four-jaw single action Optional: Three-jaw self-centering chuck, hydraulic chuck□ |
||
|
Chuck Diameter |
∅800mm□, ∅1000mm□, ∅1250mm□ |
|||
|
Saddle |
X Axis Travel |
900mm |
||
|
Z Axis Travel |
3300mm, 5300mm, 6300mm, 8300mm |
|||
|
Servo Motor |
X:4KW(5.4HP) Z:7KW(9.4HP) |
|||
|
Rapid Feed |
X: 6m/min Z: 6m/min |
|||
|
Cutting Feed |
X/Z: 0.001-500mm |
|||
|
Turret |
Turret Manufacturer |
Standard: Vertical 4-station Optional: Horizontal 8-station Horizontal 12-station |
||
|
Boring Tool Holder |
Boring Tool Holder |
Optional: (Boring bar Φ100)□ |
||
|
Hydraulic Rotary Tailstock |
Sleeve Diameter |
Φ200mm |
||
|
Sleeve Stroke |
250mm |
|||
|
Sleeve Taper |
MT NO.6 |
|||
|
Chip Conveyor |
Rear Chip Removal |
Optional: Yes□, No |
||
|
Front Chip Removal |
Optional: Yes, No |
|||
|
Grating Scale |
|
Optional: Yes, No |
||
|
Motor |
Continuous Rated |
AC 30KW(40HP) |
||
|
30 minutes rated |
AC 37KW(50HP) |
|||
|
Hydraulic pump |
2.3KW(3HP) |
|||
|
Cooling water pump |
0.56KW(0.75HP) |
|||
|
Bed |
Guide rail width |
850mm |
||
|
Control |
Controller |
Optional: SIEMENS 828D□, FANUC Oi-TF□, GSK system 988TD□ |
||
|
Net weight of machine tool |
|
3m:14T; 5m:17T; 6m:18T; 8m:20T |
||
Previous Page
Previous Page
Related Products
Adopting internationally advanced design concepts, the casting is made of high-standard wear-resistant cast iron and undergoes secondary aging treatment. The guide rail surface is precision ground by an imported guide rail grinding machine after medium-frequency quenching. The gear system is optimized with profile modification for four-speed stepless variable speed constant linear cutting, resulting in good machining accuracy, high rigidity, and strong vibration resistance.
TP Series CNC Turning and Polishing Composite Machine Tool
The TP series CNC turning and polishing composite machine tool is a series of CNC turning and polishing composite machine tools developed by Jingjia Equipment based on customer needs, specifically designed for the precise and efficient processing of large heavy shaft parts.
TEBV Series Butterfly Valve Grinding and Composite Processing CNC Machine
This is a precision equipment product developed by Jingjia, based on the process requirements for the sealing surface grinding and running-in of small and medium-sized hard-sealed butterfly valves, drawing on advanced design concepts from both domestic and international sources, meticulously crafted as a CNC machine tool for composite grinding and machining.
The roller bracket is an important component required for machining long shaft parts and is an optional accessory for the TE series CNC lathes. The rollers inside the roller bracket use large-diameter rolling bearings, paired externally with high-strength wear-resistant rollers. Each roller can be manually adjusted individually. The sliding shaft adopts a square slide block structure with high strength, effectively ensuring precision and extending service life.
Consultation
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Welcome to inquire
+86-13569054090
+86-15637113232
Address: Light Industry Park, Tiantan Industrial Zone, Jiyuan City, Henan Province
Focus on us
©Henan Jingjia Equipment Co., Ltd. This website supports IPV4 / IPV6 two-way access